Jaltest merupakan alat diagnostik yang sangat cocok untuk mendiagnosa kendaraan komersial seperti bus, truck, alat berat, special vehicle dan manufacture engine. Jaltest merupakan alat diagnostik multibrand dan multisystem dengan jangakauan yang sangat luas pada setiap sistem elektronik di kendaraan-kendaraan komersial.
Jaltest Link merupakan interface yang digunakan bersamaan dengan Jaltest Soft yang menghubungkan PC/Laptop ke elektronik kontrol pada tiap kendaraan. Jaltest Link memungkinkan berkomunikasi melalui bluetooth atau menggunakan kabel USB dengan cakupan area bluetooth hinggaa mencapai 50 meter.
Software Jaltest didesain untuk memandu teknisi dalam menemukan hingga menyelesaikan permasalahan-permasalahan dikendaraan secara step by step dan sesuai standard. Sehingga memungkinkan alat ini dalam melakukan hal-hal sebagai berikut:
- Information on connectors: Jaltest menginformasikan tentang konektor apa yang harus digunakan dan dimana lokasi konektor diagnosis tersebut di dalam kendaraan.
- Diagnosis: Merekam dan mendiskripsikan eror dalam setiap kontrol unit.
- Actuation of Components: Memungkinkan dalam berkomunikasi dan mengirim perintah pada setiap sistem yang berbeda, seperti fan activation, cyclinder cutout, compression test dan operational checking pada setiap sistem mekanikal, dst.
- Values Measuring: Mengukur dan menampilkan lebih dari 8 parameter dalam waktu bersamaan dan juga informasi refereni standart parameter.
- Parameters: Mengkonfigurasi setiap parameter yang berbeda
- System Data: Informasi konfigurasi didalam sistem dan data ECU.
- Errors Clearance: Menghapus kode eror pada kontrol unit dan mematikan lampu DTC.
Overview

Communication Interface that, along with Jaltest Soft, connects your PC to the electronic control units installed on the vehicles
- It allows to connect via Bluetooth and using the USB cable.
- Integrated Bluetooth connection with transmission capacity up to 50m
- Rugged design
- Certifications:
- FCC
- CE
- RoHs
General information

- Operating supply voltage 8 V DC — 28 V DC
- Power consumption of vehicle's battery 7 watts
- Dimensions (length x width x height) 183.5 x 131.3 x 55.7 mm
- Weight (without cables) 1.217 kg
- Service temperature 0 °C – 40 °C
- Relative air humidity 90 % (at 25 °C)
Communication protocols (ISO 15031)

- ISO 9141-2
- SAE J1850 VPW
- SAE J1850 PWM
- SAE J1708
- SCI Haldex
- CAN ISO 11898, ISO 15765-4 (OBD)
- CAN Single Wire
- CAN Low Speed
- RP 1210
- PASS THROUGH
Jaltest multibrand diagnosis is the leading multibrand diagnosis tool for trucks on the market. It allows multibrand and multisystem diagnosis on trucks, trailers, pickup, tractors or military vehicles, among others.
Thanks to the JaltestSoft diagnosis software, you can perform diagnosis on your vehicle in a fast and easy way. Jaltest Soft allows:
- Analysis and repair of diagnosis errors
- Consultation of Technical Information
- Visualizing of wiring diagrams
A single diagnosis tool for all your vehicles
These are the main features of the Jaltest diagnosis tool:
- Diagnosis
- Activations
- Components tests
- ECU data
- Systems identification
- Systems configuration
- Measuring
- Reprogramming
In addition, Jaltest offers a great service range at your disposal:
- Equipment: Hardware and Software
- Training
- Technical Assistance
- Technical Information
- Spare parts information
- Business Management
- After-sales support
- Customer Service
Coverage
View full coverage »Other vehicles
Truck diagnostics


The Jaltest diagnosis tool is the appropriate device to perform diagnosis on your truck. Multibrand and multisystem diagnostics with a wide coverage on the different electronic systems installed on Commercial Vehicles.
The application design, completely self-guided and intuitive, offers the following possibilities
- Information on connectors: Jaltest informs you about which connector to use and its location on the vehicle.
- Diagnosis:Recording and description of the errors registered on each of the control units.
NEW!! AUTOMATIC DETECTION OF THE COMPLETE ERRORS LIST ON THE SYSTEMS INTEGRATED ON THE VEHICLE.
- Actuation of Components: Possibility of interacting and sending orders on the different systems using Jaltest: such as fan activation, cylinders cutout, compression test and operational checking of the different mechanisms, etc.
- Values Measuring: Measuring and Displaying of up to 8 values at the same time. Information on the ranges of reference values .
- Parameters: Configuration of the different parameters.
- System Data: Information on the system configuration and ECU data.
- Errors Clearance: Errors clearance on the control unit and turning off of failure lamps.
A single hardware for your entire fleet
A rugged and reliable hardware which supports the different communication protocols such as OBD, OBDII, J1939, J1708, EURO IV, EURO V
New!!!!!!! SUPPORTS RP1210
PROTOCOLSCoverage
View full coverage »Leader equipment in multibrand diagnosis, with the widest coverage on the market
- EUROPEAN
- AMERICAN
- ASIAN
- REST OF MARKETS
Trailer diagnostics


The Jaltest diagnosis tool is the appropriate device to perform diagnosis on your trailer. Jaltest includes all the systems present in trailers:
- ELECTRONIC MODULE
- SUSPENSION
- ABS TRAILER
- EBS TRAILER
The Jaltest diagnosis equipment
- Information on connectors: Jaltest informs you about which connector to use and its location on the vehicle.
- Diagnosis: Recording and description of the errors registered on each of the control units.
- Actuation of Components: Possibility of interacting and sending orders on the different systems using Jaltest
- Values MeasuringMeasuring and Displaying of up to 8 values at the same time. Information on the ranges of reference values.
- Parameters: Configuration, copying and pasting of parameters.
- System data: Information on the system configuration and ECU data.
- Errors clearance: Errors clearance on the control unit and turning off of failure lamps.
- End-of-line test: It offers the possibility of performing this compulsory process when replacing EBS units.
Leader equipment in Multibrand diagnosis with the widest coverage on the market
Manufacturers
- Wabco
- Knorr-Bremse
- Haldex
Constructors
- Schmitz Cargobull
- Fruehauf
- Krone
- Montenegro
- Samro
Bus Diagnostics


The Jaltest diagnosis tool allows to perform multibrand and multisystem diagnosis.
The development on the specific field of Buses, both city and long distance buses, has consolidated Jaltest as the best tool within this area. The specific treatment of the information, independent from the truck, as well as a diagnosis addressed to be used in this kind vehicle, make Jaltest an essential tool.
The application design, completely self-guided and intuitive, offers the following possibilities
- Information on connectors: Jaltest informs you about which connector to use and its location on the vehicle. Location on buses by bodybuilder!!!!
- Diagnosis: Recording and description of the errors registered on each of the control units.
New!!! Automatic detection of the complete errors list on the systems integrated on the vehicle.
- Actuation of Components: Possibility of interacting and sending orders on the different systems using Jaltest: such as fan activation, cylinders cutout, compression test and operational checking of the different mechanisms, etc.
- Values Measuring: Measuring and Displaying of up to 8 values at the same time. Information on the ranges of reference values.
- Parameters: Parameters. Configuration of the different parameters.
- System data: Information on the system configuration and ECU data.
- Errors clearance: Errors clearance on the control unit and turning off of failure lamps.
Protocols
A rugged and reliable hardware which supports the different communication protocols such as OBD, OBDII, J1939, J1708, EURO IV, EURO V,
New!!! SUPPORTS RP1210
PROTOCOLSEquipment leader in content due to its amount of technical and specific information on buses.
Van / Pickup Diagnostics


The Jaltest diagnosis tool is the most complete multibrand and multisystem "diagnosis solution" for commercial and light vehicles. The application design, completely self-guided and intuitive, offers the following possibilities
- Information on connectors: Jaltest informs you about which connector to use and its location on the vehicle. Location on buses by bodybuilder!!!!
- Diagnosis: Recording and description of the errors registered on each of the control units.
New!!!! Automatic detection of the complete errors list on the systems integrated on the vehicle.
- Actuation of Components: Possibility of interacting and sending orders on the different systems using Jaltest: such as fan activation, cylinders cutout, compression test and operational checking of the different mechanisms, etc.
- Values Measuring: Measuring and Displaying of up to 8 values at the same time. Information on the ranges of reference values.
- Parameters: Configuration of the different parameters.
- System data: Information on the system configuration and ECU data.
- Errors clearance: Errors clearance on the control unit and turning off of failure lamps.
Tractor Diagnostics


The Jaltest diagnosis tool is able to perform multibrand diagnosis on agricultural vehicles.
The devolpment on this vehicle section over the last years, makes the use of the most advanced technology equally necessary. Last generation engines have entered the market, and the use of diagnosis is vital.
- Information on connectors: Jaltest informs you about which connector to use and its location on the vehicle. Location on buses by bodybuilder!!!!
- Diagnosis: Recording and description of the errors registered on each of the control units.
New!!!! Automatic detection of the complete errors list on the systems integrated on the vehicle.
- Actuation of Components: Possibility of interacting and sending orders on the different systems using Jaltest: such as fan activation, cylinders cutout, compression test and operational checking of the different mechanisms, etc.
- Values Measuring: Measuring and Displaying of up to 8 values at the same time. Information on the ranges of reference values.
- Parameters: Configuration of the different parameters.
- System data: Information on the system configuration and ECU data.
- Errors clearance: Errors clearance on the control unit and turning off of failure lamps.
Protocols
rugged and reliable hardware which supports the different communication protocols such as OBD, OBDII, J1939, J1708, EURO IV, EURO V
New!! SUPPORTS RP1210 PROTOCOLS
Military Trucks, Cranes or Excavators Diagnostics


The Jaltest diagnosis tool allows to perform diagnosis in military trucks (uro vamtac), bulldozers, cranes (liebherr) and other special vehicles.
The devolpment on this vehicle section over the last years, makes the use of the most advanced technology equally necessary. Last generation engines have entered the market, and the use of diagnosis is vital.
- Information on connectors: Jaltest informs you about which connector to use and its location on the vehicle. Location on buses by bodybuilder!!!!
- Diagnosis: Recording and description of the errors registered on each of the control units.
New!!!! Automatic detection of the complete errors list on the systems integrated on the vehicle.
- Actuation of Components: Possibility of interacting and sending orders on the different systems using Jaltest: such as fan activation, cylinders cutout, compression test and operational checking of the different mechanisms, etc.
- Values Measuring: Measuring and Displaying of up to 8 values at the same time. Information on the ranges of reference values.
- Parameters: Configuration of the different parameters.
- System data: Information on the system configuration and ECU data.
- Errors clearance: Errors clearance on the control unit and turning off of failure lamps.
Protocols
View full coverage »rugged and reliable hardware which supports the different communication protocols such as OBD, OBDII, J1939, J1708, EURO IV, EURO V
New!! SUPPORTS RP1210 PROTOCOLS
Vessel Diagnostics
Get more information!
|


Jaltest Marine is the latest Multibrand Diagnostics Solution developed by Cojali. This new product is aimed at performing diagnostics and maintenance procedures on Jet Skis, Outboard and Inboard engines.
Just like with the rest of our diagnosis kits, Jaltest Marine provides marine workshops and shipyards with the experience of the Jaltest Development and Technical Assistance departments.
Diagnostics, services and technical data in just one tool.
Jaltest Marine comprises, in just one tool, advanced diagnostics, service maintenance and technical data for boats, skiffs, yachts or Jet Skis:- Reading and clearing of errors.
- System technical data.
- Wiring diagrams.
- Engine technical data.
- Service and maintenance data.
- Troubleshooting Guides. Troubleshooting step by step.
- Technical releases.
- Calibrations in engine, brakes, suspension, trim.
- Parameter settings.
- Programming of keys for jet skis.
Coverage
View full coverage »The coverage of this tool comprehends important brands from Europe, Asia and America.