NOCO Genius G750 6V/12V 750mA Amp Smart Battery Charger and Maintainer
Smart, 5 step, fully automatic 0.75A battery charger and maintainer. All battery types: Wet, Gel, AGM. Best for small batteries (1.2-30Ah): ATV, Jet Ski, Snowmobile. Maintains any 6V or 12V battery in cars, RVs, boats & trucks. Unique safety features
Description
Keep your vehicle batteries charged and maintained with ease using the NOCO G750. This fully automatic charger is designed to be used with small batteries, from 1.2Ah to 30Ah, such as those found in motorcycles, ATVs, jet skis, and snowmobiles. It can also effectively maintain 6V or 12V batteries in larger vehicles like cars, trucks, boats, and RVs. The G750 uses a thorough five-step process to charge and maintain your battery and features a switch-mode design, resulting in a charger that's small and lightweight.
Five-Step Charging Process
The NOCO G750 uses a five-step process to charge and maintain your battery. First, it checks your battery's voltage to make sure that the connections are good and that the battery is in stable condition before beginning the charge process. Second, it begins a bulk-charging process with a gentle (soft) charge. Third, it continues bulk-charging and returns 90 percent of the battery's capacity.
Fourth, it brings the charge level to 100 percent by delivering small amounts of current to provide a safe, efficient charge and limit battery gassing. And fifth, it monitors the battery voltage to determine whether a maintenance charge should be initiated. The maintenance cycle is repeated to keep the battery at full charge, without overcharging, and the charger can be left connected indefinitely.
Switch-Mode Design with Advanced Features
The NOCO G750 features a high-frequency, high-efficiency switch-mode design, resulting in a charger that's compact and lightweight. An auto-memory function returns the charger to the last selected mode when you restart it. Thanks to NOCO's Rapid Charging Technology, the G750 charges batteries two times faster than traditional linear battery chargers. With Abnormality Protection, the charger automatically shuts off if it's been left in bulk charge mode for an extended period of time. The charger is also designed to adjust automatically to changing current needs and prevent reverse polarity, short circuits, open circuits, sparks, overheating, over-currents, and overcharging.
VosFX Processor for Smart Battery Charging
The NOCO G750 comes equipped with a VosFX smart processor that alters the charge process based on organic feedback from the battery to extend the battery life. The processor quickly and efficiently makes decisions on how to charge the battery without risking your safety or damage to the battery.
Safe and Easy Connecting
NOCO G750 features battery clamp connectors that are ergonomically designed to make battery connecting and disconnecting simple. Fully insulated over-mold casings with strain relief ends alleviate unwanted tension on cable leads.
An interchangeable connector allows accessories to be properly mated and fastened with a snap-lock latch. Each battery connection accessory features an over-molded inline fuse to increase your safety by protecting the battery charger from potentially dangerous short circuits.
The charger measures 1.3 by 4.5 by 2.7 inches (H x W x D) and weighs 0.5 pounds. It features a rugged polymer enclosure built for high-impact resistance--making the charger well suited for harsh or demanding work environments.
The NOCO G750 battery charger and maintainer is backed by a five-year limited warranty.
What's in the Box
NOCO G750 battery charger and maintainer, battery clamp connectors, eyelet terminal connectors, owner's manual, and user guide.
Features Included with the NOCO G750 Battery Charger
Charges 6V & 12V batteries
Returns to last selected mode when restarted
Automatically adjusts itself to changing current needs
Reverse polarity, short circuit, open circuit, spark proof, overheat, overcurrent & overcharge
High-frequency, high-efficiency for lightweight, compact charger
Charges batteries 2X faster than traditional linear battery chargers
100% full charge even with varying A/C input voltages
Safely charges Wet, Gel, MF & AGM batteries
Automatically shuts "off" if charger remains in Bulk charge mode for an extended period of time
Plug-n-play connectors for easy accessory changes
Charging Steps
Step 1: Diagnostics
Checks the battery voltage to make sure battery connections are good and the battery is in a stable condition before beginning the charge process.
Step 2: Soft Start
Begins Bulk charging process with a gentle (soft) charge.
Step 3: Bulk
Continues Bulk charging process, returns 90% of battery capacity.
Step 4: Absorption
Brings the charge level to 100%. The battery charger will deliver small amounts of current to provide a safe, efficient charge and limit battery gassing.
Step 5: Maintenance
Monitors the battery voltage continuously to determine if a maintenance charge should be initiated. If the terminal voltage falls below approximately 6.4V (6V) and 12.8V (12V), the charger will start the Maintenance cycle until voltage reaches approximately 7.2V (6V) and 14.4V (12V) and then will discontinue the charge cycle. Maintenance cycle is repeated indefinitely to keep the battery at full charge, without overcharging. The battery charger can be left connected indefinitely.
Simple User Interface
