Injector Cleaner and Tester LAUNCH

  • Availability: In Stock

Specification

Features:
- Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.
- Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.
- Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
- Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.
- Auto. test: To test injectors by simulating different working conditions.
- On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.

Specification:
- Power supply: AC220V±10%, 50/60Hz; AC110V±10%, 50/60Hz.
- Input power: 250W;
- Ultrasonic cleaner power: 100W;
- Simulated RPM range: 109990rpm; step: 10rpm;
- Time range: 19999s;
- Pulse width: 0.525ms; step 0.1 ms;
- Fuel tank capacity: 4700ml;
- Dimensions: 385mm×410mm×500mm;
- Weight: About 42kg